The infrared sensor is provided with a user manual (English) and wall fixing screws. TIME Trimmer, adjust the delay time of the sensor (from 10 seconds to 7 minutes) for delay time means that time in which the lamp stays on when a body in motion is beyond the sensing distance of the sensor PIR. Trimmer LUX, defines the conditions of work DAY / NIGHT: When you set the symbol of the "SUN", the sensor is active throughout the day vice versa, when you set the indicator to the symbol "LUNA", the sensor stops working during the day and turns on automatically when it gets dark Even though some motion sensors work differently, the override procedure is almost always the same. If you want the light to stay on far beyond the preset duration, you’ll need to override the sensor. It is possible to manually unscrew the sensor, adjust the functions (Time - LUX): With most standard motion sensor light systems, the lights stay on for anywhere between 2 and 20 minutes when tripped. If the light is left idle for a longer period of time, the sensor will automatically switch back to automatic mo (Possible when the outside light reaches 100Lux) The sensor will restart and work as per the settings adjusted.ģ. The motion sensing features will continue to work as described in electrical shock.this manual. Sensor Switch On - Turn the switch OFF for 20 seconds and switch it back ON. Light comes on half bright for selected time after dusk (Off, 3 hr., 6 sensor head must be rotatedhr., until dawn). It won’t work with every sensor, but it is a common override used, resulting in the light being left on. You may need to turn it off with others first, leave it for around 10 seconds, and then switch it on-off-on quickly. The light will work continously and normally.(Make sure the automatic mode is switched ON before using this functionality)Ģ. So all you need to do is turn the sensor off at the wall switch, then immediately turn it back on. Automatic Sensor Override Mode - Turn the switch OFF and ON within 3 Seconds, the sensor will be overridden and switched off. The head can be rotated vertically by 270°.ġ. The sensor, installed at a variable height between 1.8 and 2.5 m, has a detection distance of 12 meters (<24 ° C) and a detection range of 180 °. Compatible with incandescent bulbs up to a maximum of 1200W and with LED bulbs up to a maximum of 300W. Suitable for all types of lampholders thanks to the connection via screw terminals on the back. Made of white plastic material, can be installed inside or outside (IP44). Infrared Motion Sensor V-TAC Manual Override function Wall 180° White IP44 VT-8048 - SKU 1354 I have installed a couple of motion lights recently under the impression that the manual override works the way it used to in these units: Toggle the switch off and on quickly and you can toggle between 'manual' constant-on mode and 'auto' mode timed motion/heat sensor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |